SHACKLES - CLASS3 SAFETY ANCHOR

Return to Rigging Hardware
 

Shackle - Class 3 Safety Anchor - Alloy

RRC-271D Amend 1 Type IVA, Grade B, Class 3
All shackles meet or exceed Federal Specification RRC-271D
Working Load Limit and traceability codes shown as permanent
marking on body and pin
Available in painted, galvanized and self-colored finishes
(Dacromate coating upon special request only)
All shackles have alloy quenched and tempered pins
Shackles exhibit extreme deformation before failure*
Special testing and certification including magnetic particle,
proof load, and fatigue test available upon request at time of order
Special products engineering available to fit your special lifting,
tie down, and pulling needs

*Independent lab verified

DIMENSIONS (INCHES)
SIZE Diameter of Pin Diameter of Hole Width between Eyes Inside Length Inside Width at Bow Outside Diameter of Eye
D P E W L B R
          (min) (max)
(nominal) (nom) (ref) (nom) (nom)    
8-Mar 0.438 0.531 0.656 1.437 0.937 1.125
16-Jul 0.5 0.593 0.75 1.689 1.062 1.25
2-Jan 0.625 0.718 0.813 1.875 1.187 1.375
8-May 0.75 0.843 1.063 2.375 1.5 1.875
4-Mar 0.875 0.968 1.25 2.813 1.75 2.125
8-Jul 1 1.109 1.438 3.312 2 2.375
1 1.125 1.234 1.688 3.75 2.312 2.625
1 1/8 1.25 1.375 1.812 4.25 2.625 2.875
1 1/4 1.375 1.531 2.031 4.688 2.875 3.25
1 3/8 1.5 1.656 2.25 5.25 3.25 3.5
1 1/2 1.625 1.781 2.375 5.75 3.375 3.75
1 5/8 1.75 1.906 2.625 6.25 4 4.125

To Avoid Injury:

Do not exceed working load limit
Always follow safe rigging practices
Do not shock load or impact load
Do not replace pin with other than original equipment parts
Always inspect for wear and or damage before use.
Replace if damaged or worn
Please note side load limitations

1 3/4 2 2.156 2.875 7 4.5 4.5
2 2.25 2.406 3.25 7.75 5.25 5.25
 
Size Working Load Limit WLL (tons)* Product Code Painted Galvanized UPC 43927- Approx Weight Each (lbs)
   
UPC 43927-
8-Mar 2 M848A 46461 46463 0.35
16-Jul 2.6 M849A 46462 46464 0.57
2-Jan 3.3 M850A 40553 40552 0.84
8-May 5 M851A 40556 40555 1.8
4-Mar 7 M852A 40559 40558 2.5
8-Jul 9.5 M853A 40562 40561 4
1 12.5 M854A 40565 40564 5.5
1 1/8 15 M855A 40568 40567 7.5
1 1/4 18 M856A 40571 40570 11
1 3/8 21 M866A 40574 40573 13.5
1 1/2 30 M857A 40577 40576 18.5
1 5/8 35 M885A 40580 40579 26
1 3/4 40 M877A 40583 40582 31
2 50 M858A 40586 40517 42